Chassis & Shell
- Structure : Hot-rolled beams St-37.2 with welded ladder-type cross-members
- Axles & Suspension : mechanical underslung VB leaf spring type (2x14T/3x15T/3x18T/4x20T)
- Brakes : Two-line air brakes, automatic load sensing valve, and ABS-optional
- Rims : 15’’/20’’disc rims
- Tires : Size 10.00R15 or 12.00R20 Prime Brand
- King Pin : 2’’ or 3.5” fixed on sliding plate
- Landing Gear : A400 type, 2-speed mechanical, one side operation and suitable base plates
- Platform: Made of mild chequered steel ST37 / 6mm welded on fortified cross members
- Gooseneck:2855mm long, Made of mild chequered steel ST37 / 4mm welded on fortified cross members (with the provision of two Spare wheels, inbuilt toolbox below gooseneck)
- Loading ramps : Full-width foldable type fortified with steel channels and covered with horizontal steel bars to avoid skidding. Ramps lifting is hydraulically operated with an electrical 24V DC power pack & secured with chains and tensioners.
- Rear stabilizer : Made of two adjustable legs manually operated
Blasting & Painting
Grit blasted to SA2.5, one coat of Epoxy primer followed by two coats of polyurethane
Electrical System (ADR compliant)
- 24-volts Double- sleeved cabling in rigid tubes
- 7-pin female socket (ISO 1185) S & N type
- Rear Combination lamp
- Side lamps on each side
- Reverse buzzer
- LED Flash Stop lamp
Accessories
- Metallic Mudguards with rubber flaps
- Heavy-duty rear bumper
- Spare tyre bracket for two tyres
- Access Ladder at rear
- Two-wheel wedges with carriers
- Plastic water tank & Tool Box without tools
- Fire extinguisher box with cylinder
- Lateral protection on both sides